Rolled metal/casted metal settings

User avatar
Marcel2586
Posts: 438
Joined: Sat Mar 05, 2016 7:42 am

Rolled metal/casted metal settings

Postby Marcel2586 » Sat Mar 05, 2016 8:01 am

Settings for Rolled and casted metal.

Just chrome material or nickel.
Horizontal polish 9500 and Vertical polish 7000
Use the Ground Bumpmap (scroll down for the Ground.zip) and set it to 10%
This gives it the unfinished look as you expect from a chain
Attachments
reality_scene.png
Chain by me
MEtal Men Iron Improved_zpsmpa6a3qi.png
Picture by banditcameraman Purple anodized aluminium
ground (1).zip
Ground bumpmap
(586.54 KiB) Downloaded 288 times
this would be funny if it weren't happening to me :shock:

pciccone
Site Admin
Posts: 1801
Joined: Mon Feb 25, 2013 6:25 pm

Re: Rolled metal/casted metal settings

Postby pciccone » Sat Mar 05, 2016 8:25 am

Thank you Marcel. This is an excellent tip.
--
Paolo

User avatar
Marcel2586
Posts: 438
Joined: Sat Mar 05, 2016 7:42 am

Re: Rolled metal/casted metal settings

Postby Marcel2586 » Sat Mar 05, 2016 9:22 am

Mister Ciccone,
Is it possible to make a Tips, techniques, and recipes in the main index page?
As we may not place double topics on the board, but 9 out of 10 it works for Poser and Daz as it is Reality settings
this would be funny if it weren't happening to me :shock:

pciccone
Site Admin
Posts: 1801
Joined: Mon Feb 25, 2013 6:25 pm

Re: Rolled metal/casted metal settings

Postby pciccone » Sat Mar 05, 2016 10:33 am

That is a very good suggestion. Let me see what is the best way to handle this...
--
Paolo

pciccone
Site Admin
Posts: 1801
Joined: Mon Feb 25, 2013 6:25 pm

Re: Rolled metal/casted metal settings

Postby pciccone » Sat Mar 05, 2016 10:46 am

All done, the tips and techniques now are in the General category
--
Paolo

User avatar
Marcel2586
Posts: 438
Joined: Sat Mar 05, 2016 7:42 am

Re: Rolled metal/casted metal settings

Postby Marcel2586 » Sat Mar 05, 2016 10:52 am

Thanks!
this would be funny if it weren't happening to me :shock:

Eva
Posts: 1
Joined: Mon Mar 07, 2016 6:52 pm

Re: Rolled metal/casted metal settings

Postby Eva » Mon Mar 07, 2016 6:57 pm

;) Thanks for the tip


Return to “Tips, techniques, and recipes”

Who is online

Users browsing this forum: No registered users and 1 guest